克魯勃BE 41-542高負荷重型滾動軸承潤滑脂

詳細內容：產品基本信息： 型號：lub BE 41-542 英文名稱:Kluberlub BE 41-542 粘度等級：NLGI 品牌/產地：克魯勃，德國 包裝規格及價格：1KG/499 25KG/11800 180KG/86000 類型：無鉛重型高負荷滾動軸承潤滑脂 寶貝描述： Klüberlub BE 41-542無鉛重型高負荷滾動軸承潤滑脂 說明：Klüberlub BE41-542是一種重型（“EP”）油脂具有高粘度礦物基礎油，專用鋰皂，EP/ AW添加劑，抗氧化劑和防腐蝕添加劑。性能特點：- 具有高承載油膜能力- 優秀的抗磨損保護- 良好的耐水性- 使用溫度可達140°C。- 優秀的附著力Klüberlub BE41-542是從污染免費物質，如氯或重金屬。 應用：典型應用的Klüberlub BE41-542在高技術條件下工作的滾動軸承中低負荷和速度，例如的- 在回轉窯負載輥（水泥業）- 起重機車輪- 斗輪挖掘機- 錘式破碎機，錘式粉碎機- 工作輥在熱軋帶鋼軋機- 冷軋機的朝圣者- 滾動軸承受沖擊負荷或動態負載。 包裝規格：1千克罐25千克桶180公斤桶裝。 英文： Klüberlub BE 41-542 Lead-free heavy-duty grease for rolling bearings subject to high loads Description Klüberlub BE 41-542 is a heavy-duty (“EP”) grease with a high-viscosity mineral base oil, special lithium soap, EP/AW additives, antioxidants and anticorrosion additives. Performance characteristics: – lubricant film with high load-carrying capacity – excellent wear protection – good water resistance – service temperature up to 140 °C – excellent adhesion Klüberlub BE 41-542 is free from polluting substances such as chlorine or heavy metals. Application Typical applications of Klüberlub BE 41-542 are in rolling bearings operating under high loads and low to medium speeds, e.g. in – load rollers in rotary kilns (cement industry) – crane wheels – bucket wheel excavators – hammer crushers, hammer mills – working rolls in hot strip mills – cold pilger rolling machines – rolling bearings subject to shock loads or dynamic loads Application notes The ambient temperature should be at least 15 °C when applying the product with an automatic grease pump. Minimum shelf life Approx. 24 months when stored in a dry room in the closed original container. Anti-wear behaviour 500 h test on the FAG-FE8 rolling bearing test rig. red roller bearing 31312 A, Fa = 50 kN, P/C = 0,24, n = 75 min–1 Steady-state temperature, °C 39.5* Friction moment, Nm 10.5* Rolling element wear (V50), mg 22** Cage wear (V50), mg 42** * Average values ** Requirement of FAG/Schweinfurt for a “heavy-duty grease”: Rolling element wear: ≤ 35 mg Cage wear: ≤ 100 mg Pack sizes 25 kg bucket 180 kg drum Klüberlub BE 41-542 ● Heavy-duty grease ● For rolling bearings subject to high loads ● Free from lead, chlorine, heavy metals Product characteristics Base oil/thickener Service temperature range*, °C, approx. (DIN 51 825) FAG-FE9-test run, DIN 51 821 pt. 2 n = 6000 min–1, Fa = 1500 N, F50-running time, h/°C Flow pressure, DIN 51 805 at – 20 °C, mbar Colour Texture Drop point, DIN ISO 2176, °C Worked penetration, DIN ISO 2137 (ASTM-D 217), at 25 °C; 0,1 mm Speed factor for deep groove ball bearings (n x dm), mm x min–1, approx. Consistency class, DIN 51 818, NLGI Corrosion behaviour (Emcor test) DIN 51 802, 1 week, distilled water, rating Water resistance, DIN 51 807, pt. 1, 3 h/90 °C, rating Four ball tester, welding force, DIN 51 350, pt. 4, N Base oil viscosity, DIN 51 561 at 40 °C, mm2/s, approx. at 100 °C, mm2/s, approx. Density, DIN 51 757, at 20 °C, g/cm3, approx. mineral oil / special lithium soap – 20 to 140 121 / 140 < 1400 brown homogenous > 230 265 – 295 300 000 2 0/1 0/1 > 3000 540 32 0.93 * = The given service temperatures are guide values depending on the intended use and the application method. The upper service temperature was determined acc. to DIN 51 825 und DIN 51 821 pt. 2, the lower service temperature acc. to DIN 51 825 and 51 805. Behaviour towards elastomers and plastics The following elastomer types were tested for 168 h at 100 oder 140 °C to check their resistance to Klüberlub BE 41-542 . Material Test period/temperature Change in volume (%) Change in hardness (SHA) Tensile strength (%) Elongation at tear (%) 79 NBR 902 168 h / 100 °C 8 – 4 – 11 – 1 70 ACM 370 168 h / 140 °C 10 – 6 – 26 – 4 75 FPM 585 168 h / 140 °C 2 4 – 40 – 54 We recommend checking the resistance of all materials in contact with the lubricant, especially prior to series applications (our test results were obtained with random samples. They are no substitute for your own compatibility tests).