克魯勃UNIMOLY C 220干式系統潤滑劑

詳細內容：產品基本信息： 型號：UNIMOLY C 220 英文名稱:KLUBER UNIMOLY C 220 粘度等級：ISO VG 品牌/產地：克魯勃，德國 包裝規格及價格：1L/3500 20L/60000 類型：干式潤滑系統的摩擦潤滑劑 寶貝描述： UNIMOLY C 220干式潤滑系統的摩擦潤滑劑 說明：UNIMOLY C 220是hygrosetting灰色的干摩擦系統的潤滑基地與二硫化鉬（鉬二硫化物）和無機結合劑。UNIMOLY C 220是一種液體，readyto-使用的產品含有混合物進入一個二分類溶劑小組根據有關法定命令的可燃液體。一旦應用和硬化，這個系統的干摩擦潤滑劑很耐壓力和有寬廣的溫度范圍。由于它的結構，UNIMOLY C 220是特別適合于高真空應用。附著力是非常特殊好鋼鐵，金屬和電鍍表面。 應用： UNIMOLY C 220減少摩擦和穿在金屬/金屬滑動聯系。它可以防止螺母和螺栓從扣押，并確保統一擰緊扭矩，低摩擦。UNIMOLY C 220也可用作磨合劑，如為齒輪。其他應用領域的成交螺栓，執行和鎖組件，導軌，主軸和其他慢滑動部件受高負載。組件在非常經營高或低的溫度，而不是受濕度都傳授給特別是使用壽命長。作為噴霧UNIMOLY C 220是特別適合作為大會使用援助和維修目的： 包裝規格：1升瓶 20升桶 德語： UNIMOLY C 220 Hygrosetting dry lubricant for tribo systems Description: UNIMOLY C 220 is a hygrosetting grey dry lubricant for tribo systems with an MoS2 base (molybdenum disulfide) and an inorganic binding agent. UNIMOLY C 220 is a fluid, readyto- use product containing a mixture of solvents classified into the A II group according to the relevant statutory order on combustible liquids. Once applied and hardened, this dry lubricant for tribo systems is very resistant to pressure and has a wide temperature range. Owing to its structure, UNIMOLY C 220 is particularly suitable for high-vacuum applications. Adhesion is very good on special steel, metal and electroplated surfaces. Application: UNIMOLY C 220 reduces friction and wear in metal/metal sliding contacts. It prevents nuts and bolts from seizing, and ensures a uniform tightening moment and low friction. UNIMOLY C 220 is also used as a running-in agent, e.g. for gears. Other fields of application are clinch bolts, hinge and lock components, slideways, spindles and other slowly sliding components subject to high loads. Components operating under very high or low temperatures and not subject to humidity are imparted an especially long service life. As a spray UNIMOLY C 220 is particularly suitable as an assembly aid and for maintenance and repair purposes. Application notes: Stir or shake well before use. This also applies to the spray version. UNIMOLY C 220 can be applied by immersion, spraying or by brush. Other types of application are indicated upon request. The surfaces to be coated must be cleaned/degreased and be completely free from oil, grease, water, corrosion and scale. When applying UNIMOLY C 220 by spraying, use a lacquer spray gun. Other application conditions: Feed pressure: 2 bar Spraying distance: approx. 20 cm Nozzle diameter: 0.8 mm Ensure that only pressurized air is used which is free from oil and water. In the case of spraying by hand, it is recommended to apply the product in a zig-zag pattern. When spraying systems are used, an agitator should be installed in the container to prevent the solid particles from settling. When applying the product by immersion, use containers which are resistant to solvents. In addition, make sure that the immersion bath is not exposed to an increased degree of humidity. Therefore, if you have an open bath system, only use a small amount of UNIMOLY C 220. The recommended film thickness for tribological loads is between 5 and 15 μm. For cleaning the spray gun and, if required, diluting UNIMOLY C 220, the SOLUTIN C 9 diluting and cleaning agent can be used.UNIMOLY C 220 is ready to handle after approx. 5 min at 20 °C. The hardening process is completed after 30 min. at 20 °C. Minimum shelf life: The minimum shelf life is approx. 12 months if the product is stored in the original closed container in a dry place at 20 °C. Pack sizes: 400 ml spray can 1 l can 20 l drumUNIMOLY C 220 Hygrosetting at room temperature Suitable for high pressures Resistant to low and high temperatures Suitable for vacuum applications Excellent adhesion on metals Suitable for materials susceptible to cold welding, e.g. special steel nuts and bolts Well-proven as an assembly aid Improves the running-in process Prevents stick slip